Once you received your order, your decal will consist of three layers as illustrated. (Vinyl design + Transparent transfer tape + White or blue wax cardboard paper)
Clean the area meticulously with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a debris behind that will prevent the sticker from adhering well.
Prepare the FZ07 sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker adhere to the transparent transfer tape.
Peel the white wax cardboard paper backing off the sticker. If the sticker clings to the wax cardboard backing, slowly replace the paper backing and repeat Step 2.
Slowly apply the sticker onto the surface and rub it in place thoroughly with your tumb or fingers.
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.
*Use a your tumbs to remove any air bubbles in the center and push the air out.
*For best results do not apply a sticker in extreme hot or cold temperatures.
Step by step video installation guide coming soon!